Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021
Bail assembly (D-size) - Has star wheel assemblies attached
Carriage belt (D-size) - Long/wide belt attached to the carriage
Carriage belt - Drives the carriage assembly - For use with 24-inch plotters
Carriage Belt - Drives the carriage assembly - For use with 42-inch plotters
Pincharm spring retaining bushing
Universal Serial Bus (USB) interface cable (Flint Gray) - Type A connector to type B connector - 1.8m (6.0ft) long
Carriage assembly trailing cable (D-size) - Has 60-pin (F) connectors - 1.6m (5.2ft) long
Carriage assembly trailing cable (E-size) - Has 60-pin (F) connectors - 1.9m (6.2ft) long
Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 1.6m (5.1ft) long.
Carriage assembly trailing cable kit - CABLE ONLY - NO LONGER INCLUDES installation instructions trailing cables mounting clips and a ferrite - Cables have 30-pin (M) edge connectors - 2.0m (6.5ft) long - For 42-inch models
Bail lift cam - Mounted behind the bail engaging lever support
Main Board SV 4 Camera 600 dpi
Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor
Overdrive clutch assembly - Small, wide gear near overdrive gear - Held in place with a retaining E-ring
Control panel assembly - Includes ribbon cable and english overlay marked with Menu Back Enter Cancel and Form feed and cut
Control panel assembly - Includes ribbon cable and english overlay marked with Menu, Back, Enter, Cancel, and Form feed and cut
Carriage top cover
Carriage ink cartridge slot cover
Top cover assembly (Gray) - For the 24-inch DesignJet 500 printer series
Left end cover and EIO cover (Gray) COVER WHITE (SVC) - Right cover Left end cover and EIO cover - White or Gray plastic cover on left side
Cover kit for drive roller encoder sensor
Cross-brace - Brace that connects and supports the two stand legs - For 24-inch plotters
Cutter assembly - Mounts on carriage slide rod to the right of the carriage
Media deflector with media button - The media deflector furthest to the right side - Includes media load button
PPC CTX7 SATA, HDD w/ Recovery DVD
Vacuum fan assembly (OEM LIMITED SUPPLY).
High gloss white film (4 mil) - 91.4cm (36in) x 30.5m (100ft) roll
Front panel assembly - Complete
Overdrive gear cluster
Bail engaging lever gear
Scanner glass pane - Glass plate that documents to be scanned lay on. For HP Models 42" Scanner Glass Plate assembly.
Rollfeed guide kit - Left and right guides mounted under printer - Used to attach rollfeed housings to the printer
Cutter guide - Guide bar for the cutter assembly - For 42-inch plotters
Holder - For Quick Reference Guide - On right end cover
Media deflector holders - For the DesignJet 500/800 printer series
Ink tubes assembly - Includes four ink tubes, complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and four setup pens - For use with the 42-inch Designjet 500/800 printer series
Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips
CALIBRATION SHEET Calibration sheet - For the DesignJet T1100 MFP 4500mfp 4500 Scanner 820 MFP printer series
Touchscreen LCD panel - This is the touch enabled LCD display only
Leg assembly, only one included, not both as shown - Side support for the printer - Does NOT include the foot assembly
Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pinch arm lever, pinch arm lever bushing
SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML
Media bin (Flint gray) - Plastic tray that mounts to the printer stand legs
4MB, 70nS DRAM SIMM memory module
64MB SO-DIMM memory 133mhz cl3 module HP DesignJet 500 / 800 144pin PC100 Memory Module installs into the formatter EIO board.
16MB, 70nS, 36-bit SIMM memory module
32MB, 70nS, 36-bit parity SIMM memory module
Electronics module - Contains power supply main logic board interface connectors and fan
Electronics module - Contains power supply, Main Logic board, interface connectors, and fan
Paper axis motor assembly - Includes cablesPaper axis motor assembly - Includes cables
Repacking Kit - Materials to Repack Plotter
HP universal high-gloss photo paper - 107cm (42in) x 30.5m (100ft) roll
Interconnect PC board Interconnect PC board - Installed in right-side of printer
Formatter upgrade kit - Adds HP-GL/2 DesignJet 500 800 series GL/2 Card C7772A - Plugs into an EIO card slot. GL-2 AND RTL FORMATTER HP-GL/2 and RTL formatter PC board
Formatter PC board FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) formatter fits for HP Designjet Plotters fix error: 05:10
Formatter PC board FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2)
Formatter PC board FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware)
formatter PC board EIO FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2)
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2) formatter fits for HP Designjet Plotters fix error: 05:10
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) formatter fits for HP Designjet Plotters fix error: 05:10
JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector
Power supply/motor driver board
Q6713-60001 Main elelectronics board - For the DesignJet 820MFP/T1100MFP/T1200MFP/T1200MFP HD printer series and the DesignJet 4520/4500 scanner series
External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing
Guideplate assy sv Guide plate assembly - For manual paper feed
Back platen assembly - Curved cover/guide that is installed below the paper drive roller - For use with 24-inch plotters
Front platen kit - Includes platens for both the 24-inch and the 42-inch models
BACK PLATEN 42 inch (SVC) - RCBack platen assembly - Curved cover/guide that is installed below the paper drive roller - For use with 42-inch plotters
Primer assembly - Mounted on left side of plotter
Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads. Used to remove air and prime the ink system
Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
Overdrive roller assembly (D-size) - Includes overdrive shaft with rollers, overdrive housing, media deflector without media button, and media deflector with media button
Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 24-inch plotters
Drive roller encoder sensor
Paper entry and exit media sensor
Service station - Service St SV - RCService station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer
Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer
Spittoon assembly - Contains absorbers which hold excess ink from cartridges
Left spittoon assembly - Contains absorbers which hold excess ink from printheads
Bail gear support 'claw' spring - Attached between the bail engaging lever support and the bail gear assembly
Compression spring - Installed between pincharm assembly and bushing
Starwheel mount assembly - Includes cover, body, spring and two starwheels
Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring
Encoder strip - For use with 42-inch plotters
Trim kit - Includes the front and back trims for the left and right sides - Installed between the main printer chassis and the left or right end covers
DesignJet 500/800 wheel kit - Metal bar with two attached wheels - Used with the 24 inch stand only