Aerosol fan assembly Hewlett Packard Designjet Plotters.
Vacuum fan assembly for Hewlett Packard Designjet Plotters.
Air pressurization system (APS) - Includes pump, valve, pressure sensor, and APS housing
Belt and tensioner assembly - Carriage belt and the metal tensioner for 42-inch plotters / DesignJet.
BELT only KIT MR SERV 42 Belt assembly, tensioner (metal wheels) not included. Belt For 42-inch plotters. (for belt and tensioner order CQ109-67004).
BELT only KIT MR SERV 42 Belt assembly, tensioner (metal wheels). Belt For 42-inch plotters.
Left-side arc assembly - Brace that is used for the cover assemblies to connect onto
Carriage flex cable assembly - Black plastic piece that covers and connects printheads to ribbon cables that connect to carriage PCA
Ink supply station to cartridge cable connector one sold (assembly takes up to 6).
Carriage assembly - DesignJet 4000/4500 series carriage assembly - Does not include cutter, Carriage PCA, encoder and line sensors
Carriage PCA (Carriage controller board) assembly- Located on top of carriage assembly
Paper cutter assembly for Hewlett Packard Designjet plotters. Cutter Assembly for DesignJet 4000 4500 Z6800 Z6200 Z6100 T7100 D5800 Printer Plotter Parts
160GB Hard Disk Drive (SATA)- For Hewlett-Packard designJet plotters. (PATA PART NUMBER IS Q1273-69281).
High gloss white film (4 mil) - 91.4cm (36in) x 30.5m (100ft) roll
40GB Hard Disk Drive (PATA)- For Hewlett-Packard designJet plotters. (SATA Part Number is Q1271-69751).
Spindle hub (Blue) - Installed on the left end of the rollfeed spindle. For the Right side /black hub see (C6095-40092).
Spindle hub (Black) installed on the Right side of the rollfeed spindle. For the Left side /blue hub see (C6090-60105).
Ink supply tubes - Does not include trailing cable assembly
Ink supply tubes - include trailing cable assembly Srk tubes+trailing cables MR serv. Please let us know type of trailing cable required: B Bare male Q1273-60158 type or A Encased female Q1273-60156 type.
Service station cable - Includes printhead cleaner door switch
256MB, 184Mhz, SDRAM DIMM memory module for HP Designjet Printer, Scanner, Photo Printers, and MFP models.
Right roll module assembly Right Hand Roll Module for HP DesignJet 4000 4020
Scan-axis motor assembly - For 42-inch plotters
Media-axis motor - Drives the drive roller assembly - Includes the media advance drive mount and cable - For 42-inch plotters
Paper for DesignJet 1055 Series, DesignJet 800 Series, DesignJet 130 Series, DesignJet 500. Bond Paper - 24 inch x 150.
HP universal high-gloss photo paper - 107cm (42in) x 30.5m (100ft) roll
Carriage PCA (Carriage controller board) assembly - Located on top of carriage assembly
Interconnect PC board
Gamut PCI PC board Gamut PCI PC board HEWLETT PACKARD - Gamut PCI PCA SERVICE Board For DJ4000 SERIES.
Carriage PCA (Carriage controller board) - Located on top of carriage assembly
Carriage PCA - Carriage controller board - Located on top of carriage assembly
HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM
Power supply assembly - Input voltage 100 - 127/220 to 240VAC (+/- 10%) auto range, 6/3 amp maximum, 50/60 Hz (+/- 3Hz), 500W/105W standby - For use on the Designjet 4500 printer
JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
Setup print head - Includes four printheads
Paper drive roller assembly - For 42-inch plotters
42-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps
Left-side spittoon assembly - Holds expelled ink from cartridge during refresh cycle
Middle-left spittoon assembly - Holds expelled ink from cartridge during refresh cycle
Cartridge trays - Hold the ink cartridge assemblies