Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
Carriage belt for HP DesignJet 36inch size plotters.
Carriage belt 24in belt
Right bail bracket
Media sensor mounting bracket
Cutter bushing - Connects cutter assembly to slider rod
RS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long
RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.
Pen carriage assembly - Drafting 'Head' assembly (Holds the four ink cartridges)
Control panel assembly - Includes ribbon cable
Cutter mechanism assembly - Auto cutter for rollfeed paper
Tubeaxial fan (Matsushita FBK-09A12M2-MOD) - 82.5mm (3.25in) mount hole spacing, 25.5mm (1.0in) thick, 12VDC, 35.3CFM
Overdrive gear cluster
Bail engaging lever gear
Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers
Housing assembly (on left side)
SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML
DesignJet 650C service manual (English)
4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models.
4MB, 80nS, 36-bit SIMM memory module
16MB, 70nS, 36-bit SIMM memory module
32MB, 70nS, 36-bit parity SIMM memory module
External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
External token ring interface module - Has DB-9 connector
External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
External JetDirect LAN interface module with EtherTwist (10Base-T) connector
'X' axis motor mount
Interconnect board
Main logic board, HP OEM DesignJet MAIN LOGIC PCA BOARD FOR 650C
External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
Adobes PostScript (Level two) SIMM module
Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)
Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output
Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
Primer assembly - Mounts under the service station assembly on the left side of the plotter
Idler pulley - For main drive belt
Idler drive pulley - Applies tension to the pen carriage drive belt (small belt)
Reduction pulley - Includes 2 Bearings Shaft (0.16in Diameter on Both Ends) Flange Pulley and Instructions
Ink drop reservoir - Installs on right side of plotter
Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
SIMM module shield
Extension spring - Zinc plated music wire, 0.875in long, 0.187in OD, 0.020in wire diameter, 1.8 in/lb rate - For pen carriage drive belt pulley tensioning wedge
Extension spring - Holds the rollfeed access cover closed
Starwheel mount assembly - Includes cover, body, spring and two starwheels
Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring
Tensioning wedge (cam tensioner) - For the pen carriage drive belt pulley