Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
Control panel - Includes display
Diverter assembly - Diverts paper to duplexer assembly or face up tray or face down delivery assembly
Right door assembly - Door below paper tray 1 - Support strap attached to right side
Tubeaxial fan for LaserJets
Fan for LaserJets
Fan/4 for LaserJets
Main print drive gear assembly
Paper input guide
Transfer guide - Guide transfer roller is mounted into. (complete trasfer roller assy. RG9-1361-020CN).
Laser/scanner assembly
Maintenance kit (220V) - Replacement parts after 350K pages includes, fusing assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed
16MB SIMM memory module
2MB, 32-bit SIMM memory module
2MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
4MB, 70nS, 36-bit parity SIMM memory module
4MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
8MB, 70nS, 36-bit parity SIMM memory module
8MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
External token ring interface module - Has DB-9 connector
External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
External JetDirect LAN interface module with EtherTwist (10Base-T) connector
Elevator stepper motor - Moves the delivery head assembly into position
Main motor for HP LaserJet 5Si Mopier
Multipurpose paper input tray separation pad
Paper handling controller board - Includes short ribbon cable to connect to formatter board
JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
DC controller board
Switch/sensor board - Includes face down tray sensors, fusing delivery sensor and door switch
JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors
EtherTwist (10Base-T) or 100Base-TX LAN interface board - Has an RJ-45 connector
External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
Postscript (level two) SIMM module
Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)
Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output
Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
Low voltage power supply - Includes power switch, AC receptacle, and DC power supply
Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle.
Multipurpose paper input tray feed roller
Transfer charge roller (Black)
Feed/separation roller - Has a blue gear on one end and blue release tab on the other
Transfer roller - Transfer charge roller (Black)
Face Up solenoid assembly
Support strap - Supports door when open
Torque Limiter - Hewlett Packard LaserJet Models
Transfer assembly - Mounted on right side of 2000 sheet tray
Face-down output tray - At top of printer